How To Shingle A Roof & The Pros and Cons of Roofing Yourself

Shingling a roof is a significant home improvement project that requires careful consideration. Whether you’re an avid DIYer or someone who enjoys tackling new challenges, the thought of replacing your own roof might have crossed your mind. After all, it could save you a considerable amount of money. However, before you climb that ladder, it’s essential to weigh the pros and cons of DIY roof replacement.

In this guide, we’ll walk you through the basics of how to shingle a roof, and we’ll help you determine whether a DIY approach is right for you. Whether you’re new to LENCO or already familiar with our extensive range of roofing materials, this article is designed to give you the knowledge you need to make an informed decision.

How To Shingle A Roof: The Basics

Replacing your roof is not a project to take lightly. The process requires time, effort, and a good understanding of roofing techniques. Here’s a step-by-step overview of how to shingle a roof:

⚠️ Important Warning: Before you begin, it’s crucial to note that the instructions provided here are general guidelines. Always refer to the manufacturer-specific instructions for the roofing materials you are using. These instructions may vary depending on the brand and product, and following them is essential to ensure proper installation and maintain your warranty. If the manufacturer’s instructions differ from the advice provided in this guide, the manufacturer’s instructions should always take precedence. Additionally, some warranties may require professional installation, so be sure to check the specific terms associated with your materials.

1. Prepare Your Workspace

• Begin by removing old shingles, nails, and debris. It’s essential to start with a clean surface to ensure proper installation of new shingles.
• Inspect the roof for any damaged or rotting wood and replace it if necessary.

2. Install the Drip Edge

• The drip edge helps prevent water from seeping under the shingles and protects the fascia. Install it along the eaves, securing it with roofing nails.

3. Lay Down the Underlayment

• The underlayment acts as a moisture barrier. Roll it out across the roof, overlapping each row by at least 6 inches. Secure it with roofing nails or staples.
• Tip: Selecting the right underlayment is crucial for protecting your roof. Explore different options to find one that best suits your needs.

4. Start Shingling

• Begin at the bottom edge of the roof and work your way up. Lay the starter shingles first, ensuring they overhang the drip edge by about half an inch.
• Lay the first row of shingles directly on top of the starter shingles. Nail them down, leaving about 6 inches of space between each nail.
• Continue laying shingles, staggering the joints, and working your way up the roof.

5. Install Flashing

• Flashing is used around chimneys, vents, and valleys to prevent water from penetrating these vulnerable areas. Ensure it’s securely fastened and properly sealed.

6. Finish with Ridge Cap Shingles

• The ridge cap shingles cover the peak of the roof, providing a finished look and additional protection against water infiltration.
• Tip: Using the right ridge cap shingles can make a big difference in the durability and appearance of your roof. Consider products that match your chosen shingles for a seamless finish.

What Are The Pros And Cons Of DIY Roof Replacement?

Now that you have a basic understanding of how to shingle a roof, let’s explore the pros and cons of replacing your roof yourself.

Pros of DIY Roof Replacement

• Cost Savings

1. 1. • One of the most significant advantages of shingling your roof yourself is the potential for cost savings. By eliminating labor costs, you can significantly reduce the overall expense of the project.

• Flexibility and Control

1. 1. • When you handle the project yourself, you have complete control over the materials and the final look of your roof. You can work at your own pace and make adjustments as you go.

• Satisfaction and Accomplishment

1. • Completing a major project like roofing can be incredibly satisfying. You’ll have the pride of knowing you did it yourself and the added confidence in your abilities.

Cons of DIY Roof Replacement

• Risk of Injury

1. 1. • Roofing is physically demanding and involves working at heights. Falls and accidents are real risks, especially if you’re not experienced.
      • Safety Reminder: If you decide to take on this project, ensure you have the right safety gear, including fall protection and non-slip footwear.

• Time-Consuming

1. 1. • Shingling a roof is not a quick project. It requires a significant time investment, particularly for those without experience. If time is a factor, hiring a professional might be the better option.

• Potential for Mistakes

1. 1. • Roofing requires precision. Incorrect installation can lead to leaks, water damage, and other costly repairs down the road. Mistakes made during a DIY project might negate the initial savings.
      • Tip: If you’re unsure about certain aspects of the project, don’t hesitate to consult with a roofing expert or a professional service. It can save you time and money in the long run.

• Lack of Warranty

1. 1. • Many roofing materials come with warranties, but these often depend on professional installation. DIY installation might void these warranties, leaving you without protection if something goes wrong.

• Legal Compliance and Permits

1. • Roofing projects may require permits and must adhere to local building codes. Failure to comply with these regulations can result in fines or having to redo work.
   • Note: Before starting your project, check with your local building authority to ensure you have the necessary permits and that your plans meet all legal requirements.

Should You DIY or Hire a Professional?

Deciding whether to shingle your roof yourself or hire a professional comes down to weighing the pros and cons. If you’re confident in your skills and willing to invest the time, DIY roof replacement can be a rewarding project. However, if the risks outweigh the benefits, hiring a professional may be the better choice.

If you’re leaning towards DIY, make sure you’re well-prepared with the right tools and materials. For those who prefer professional assistance, getting an accurate estimate from a trusted roofing service can help you make an informed decision.

 

Shingling a roof is a significant undertaking that requires careful consideration. Whether you decide to tackle the project yourself or hire a professional, understanding the process and the pros and cons of DIY roof replacement is crucial. If you’re ready to start your roofing project, explore LENCO’s selection of roofing products, or reach out to our Design Services and Estimating Service to ensure your project is a success.